PRODUCTS > Precision Products > Carbide Shims
carbide shims for inserts, wear resistant, carbide tools, cutting tool
  • carbide shims for inserts, wear resistant, carbide tools, cutting tool

Carbide Shims

1. We have full series sizes of American standard
2. Most of them we have in stock, immediate delivery
3. 100% vrigin material, no 0.1% recycled material
4. High precision and flatness, ensure the stability while cutting
5. Use MES and ERP to control the whole production line to guarantee the uniform quality

Production Introduction

The main usage for the Carbide shims is assisting the cutting of carbide inserts, so it has high requirement of the flatness. We need to ensure there is no any gap between two pieces of carbide shims when you put together.

The sizes we are mainly producing are American standard. We have almost all the sizes in stock, can provide you immediate delivery. All the carbide shims are produced with 100% virgin material and HIP sintering. We are supplying them to branded inserts manufacturers. We did not receive any complain in the past because of the high quality control standard.

 The grade information

GRADE

ISO CODE

DENSITY

HARDNESS

Bending Strength

g/cm3

HRA

MPa

YG8

K20

14.65-14.85

90

2600

YT5

P30

13.05

90.5

2200

 Different types of carbide shims we are producing






image.png
Our specifications for shims are over 200 kinds, and Customization welcomed.


62397834d7d5f.png 623978350c038.png 62397835373c9.png 6239783560ccf.png

Previous: Wire Guide